Description
Products Description
Wall cutting machine is mainly used for building or old building renovation, reinforcement, change the design, you can cut the door, window or elevator hole and other large area wall cutting.
The structure of non-destructive, one-time molding, in addition to the traditional master can avoid the construction of the damage to the structure of the building; drilling round hole way consumption time, material, human, but also can save a lot of rest time and cost.
The structure of non-destructive, one-time molding, in addition to the traditional master can avoid the construction of the damage to the structure of the building; drilling round hole way consumption time, material, human, but also can save a lot of rest time and cost.
Technical Parameter
Electric Wall Cutting Machine | ||||||
Model | YG-800 | YG-1000 | YG-1200 | |||
Saw blade diameter | Φ800mm | Φ1000mm | Φ1200mm | |||
Cut depth | 320mm | 400mm | 500mm | |||
Motor power | 6150W | |||||
Cutting efficiency | 3-6m/h | |||||
Voltage | 220v | |||||
Best use length | 100m | |||||
Size | 1000*1000*800mm | 1200*1200*800mm | 1400*1400*900mm | |||
Weight | 50kg | 78kg | 98kg | |||
Frequency | 50-60Hz | |||||
Semi-automatic add a set of servo motor: 1500 w | ||||||
Automatic add two sets of gear sets | ||||||
Remote add two servo motor: 1500 w | ||||||
Hydraulic Wall Saw Machine | ||
Name | Hydraulic power station | |
Max. power | 25kw | |
Motor cooling method | Air cooling | |
Rated voltage | 380v,50hz | |
Pressure stages | 3 | |
Max. operating pressure | 200bar/20Mpa | |
Oil flow rate | 30-80L/min | |
Dimensions | 600*650*1050mm | |
Weight | 220kg | |
Name | Wall saw head | |
Saw blade diameter | 800-1400mm | |
Cutting depth | 620mm | |
Max.working pressure | 180bar/18Mpa | |
Max.oil flow rate | 100L/min | |
Gearing | Grear | |
Rotation speed | 450/950/1300rpm | |
Dimensions | 400*420*400mm | |
Weight | 38kg | |
Products Display
* High power, stable output, export-grade gears, not easy to damage, fast cutting speed! New more convenient! The material strength is higher than that of the ordinary cutting machine.
* The lifting screw is made of bearing steel. The wire is widened by 2 times. It is more wear-resistant and easy to replace. The dust cover is fixed and the whole machine is integrated, which is more beautiful and practical! The middle main column is designed for professional bearing contact, making wear-resistant cutting more labor-saving.
* The lifting screw is made of bearing steel. The wire is widened by 2 times. It is more wear-resistant and easy to replace. The dust cover is fixed and the whole machine is integrated, which is more beautiful and practical! The middle main column is designed for professional bearing contact, making wear-resistant cutting more labor-saving.
* One Manual Wall Cutter Package = 1 racket with motor + 2 pcs of 1.2 meter trail + 1 saw blade + 1 dust cover
* One semi-automatic Wall cutter Package =1 racket with motor + 2 pcs of 1.2 meter trail + 1 saw blade + 1 dust cover + 1 Remote control control box + 5 meter connecting cable
* One semi-automatic Wall cutter Package =1 racket with motor + 2 pcs of 1.2 meter trail + 1 saw blade + 1 dust cover + 1 Remote control control box + 5 meter connecting cable
* The whole set of machine inculdes:
1. one frame with an electric motor, 220V, 50Hz, 6580w.
(We could customize the motor according to your requirement.)
2. one disk, 800-1000mm or customized.
3. one saw cover.
4. one set of rails, 1.2m*2 pcs.
5. one set of anchors
1. one frame with an electric motor, 220V, 50Hz, 6580w.
(We could customize the motor according to your requirement.)
2. one disk, 800-1000mm or customized.
3. one saw cover.
4. one set of rails, 1.2m*2 pcs.
5. one set of anchors
Products Real Shot
Applicable to concrete wall, brick wall or stone, highway, bridge, construction engineering cutting, can cut at any angle,occupying small space, cutting area is controlled at will.
Company Profile
Packing and Delivery
Reviews
There are no reviews yet.