Description
Products Description
CNC Boring Machine
This product is mainly for the processing of the box parts to achieve a five-sided processing of one time clamping. The nose of the spindle can be extended to the workpiece, and the square ram can also be telescopic to facilitate deep milling and deep groove. It can meet the processing of products with high coaxial concentricity. It is equipped with a rotary table with a weight of 0.001. It can realize five-axis linkage machining, stable casting structure, strong shock resistance, bending resistance of the column and high anti-torsion rigidity. The uppermost side of the stroke end can also be stably processed to achieve the best performance of the product.
Performance | HBM-T110 | HBM-T130 | HBM-T160 | HBM-T200 | ||||||
Travel | ||||||||||
Work table travel(X/Y/Z) | mm | 4000/1100 | 6000/1300 | 8000/1600 | 10000/2000 | |||||
Distance from spindle surface to worktable | mm | 0-1100 | 0-1300 | 0-1600 | 0-2000 | |||||
Rail way | Two linear guide rail, one hardened rail | |||||||||
Work table | ||||||||||
Table size | mm | 4000×2000 | 6000×2000 | 8000×2000 | 10000×2000 | |||||
The maximum load capacity of the workbench | T | 30 | 50 | 70 | 100 | |||||
Spindle | ||||||||||
The spindle taper(model sleeve diameter) | mm | BT50 | BT50 | BT50 | BT50 | |||||
The spindle motor power | KW | 22 | 26 | 26 | 30 | |||||
Splindle speed | RPM | 2000 | 2000 | 2000 | 2000 | |||||
Accuracy | ||||||||||
Position Precision | mm | 0.01/1000 | 0.01/1000 | 0.01/1000 | 0.01/1000 | |||||
Repeated position precision | mm | ±0.01 | ±0.01 | ±0.01 | ±0.01 | |||||
Size | ||||||||||
Net weight | T | 40 | 55 | 65 | 75 | |||||
Product details
Casting
The base, worktable, column, sliding seat, and rotary worktable are all made of HT300 cast iron, high-quality resin sand
molding, high-strength and high-quality cast iron, and have a perfect heat treatment process to eliminate residual stress,
and arrange enough reinforcing rib plates to ensure the whole machine has sufficient strength, rigidity and high stabilit
Ram
The ram is made of high-strength and high-quality cast iron HT300, which has been heat-treated and surface-quenched.
At the same time, all surfaces of the ram are ground to ensure high rigidity and stability when the ram and the main
shaft are extended, and at the same time, it can be used for years without wear. The ram is located in the middle of the column, providing greater stability and rigidity than traditional off-hook rams
At the same time, all surfaces of the ram are ground to ensure high rigidity and stability when the ram and the main
shaft are extended, and at the same time, it can be used for years without wear. The ram is located in the middle of the column, providing greater stability and rigidity than traditional off-hook rams
X AXIS
The X-axis adopts two heavy-duty 65 line rails, and the line rails adopt the Taiwan brand Hiwin
Y Axis
The Y-axis adopts four heavy-duty line rails, two line rails are located on the front face of the column, and the other
two line rails are located on the rear inner side of the column, so as to ensure that the ram can ensure sufficient rigidity
and stability when milling forward and moving left and right
The Y-axis of the T160 floor boring machine adopts a nitrogen balance cylinder and a pulley block for counterweight to
increase the Y-axis stroke. At the same time, it is ensured that the uppermost side of the Y-axis stroke end can also be
processed stably.
two line rails are located on the rear inner side of the column, so as to ensure that the ram can ensure sufficient rigidity
and stability when milling forward and moving left and right
The Y-axis of the T160 floor boring machine adopts a nitrogen balance cylinder and a pulley block for counterweight to
increase the Y-axis stroke. At the same time, it is ensured that the uppermost side of the Y-axis stroke end can also be
processed stably.
Z Axis
Z-axis adopts a hard rail between the ram and the sliding seat to ensure the stability and rigidity
when the ram is extended
when the ram is extended
CNC Controler
CNC System (Optional Fanuc or Siemens system)
Machining Products Display
About us
The product is overweight, please contact customer service for detailed weight
Reviews
There are no reviews yet.