Description

Products Description

Fiber laser cleaning machine introduction:

There is oxidation and corrosion when metals meet oxygen and water vapor in air. It will greatly damage the metal work-piece and the rust will spread from outside to inside and become worse and worse as time goes on, until the whole work-piece is totally corrupted. So rust removal is extremely important. Laser rust removal uses not chemical agents or mechanical polishing, so it is faster and safer.

Fiber Laser rust removal Machine is a new generation of industrial surface cleaning laser system. It adopts the advanced laser source, laser optical scanners and control system to meet the requirements of metal surface cleaning process.

Model	QA-LC50B	QA-LC100	QA-LC200	QA-LC300	QA-LC500	QA-LC1000
Laser source	Fiber	Fiber	Fiber	Fiber	Fiber IPG	Fiber IPG
Laser Power	50W	100W	200W	300W	500W	500W
Fiber cable L	1.5-3 M	2-5 M	2-8 M	2-8 M	10-100M	10-100M
Pulse Energy	1 mJ	1.5 mJ	1.5-10 mJ	2 mJ	100 mJ	100 mJ
Wavelength	1060nm	1060nm	1060nm	1060nm	1060nm	1060nm
Frequency	1-1000KHz	1-3000KHz	1-2000KHz	1-2000KHz	2-50KHz	2-50KHz
Clean speed	≤5 M²/Hour	≤12 M²/Hour	≤20 M²/Hour	≤30 M²/Hour	≤60 M²/Hour	≤60 M²/Hour
Cooling	Air cooling	Air cooling	Water cooling	Water cooling	Water cooling	Water cooling
Dimension	300160450	650200550	900450950	900450950	11206001080	11206001080
Weight	18Kg	40Kg	90Kg	95Kg	220Kg	260Kg
Beam width	10-70mm	10-70mm	10-110mm	10-110mm	10-170mm	10-170mm
Optional	Manual/Auto	Manual/Auto	Manual/Auto	Manual/Auto	Manual/Auto	Manual/Auto
Temperature	5-40 ℃	5-40 ℃	5-40 ℃	5-40 ℃	5-40 ℃	5-40 ℃
Humidity	<90%	<90%	<90%	<90%	<70%	<70%
Power	< 1000W	< 1500W	< 2500W	< 3000W	< 6000W	< 8000W
Voltage	Single Phase 220V,50/60HZ	Single Phase 220V,50/60HZ	Single Phase 220V,50/60HZ	Single Phase 220V,50/60HZ	Single Phase 220V,50/60HZ	Three Phase 480V,50/60HZ