Description

Products Description

CNC Boring Machine

This product is mainly for the processing of the box parts to achieve a five-sided processing of one time clamping. The nose of the spindle can be extended to the workpiece, and the square ram can also be telescopic to facilitate deep milling and deep groove. It can meet the processing of products with high coaxial concentricity. It is equipped with a rotary table with a weight of 0.001. It can realize five-axis linkage machining, stable casting structure, strong shock resistance, bending resistance of the column and high anti-torsion rigidity. The uppermost side of the stroke end can also be stably processed to achieve the best performance of the product.

Performance			HBM-T110	HBM-T130	HBM-T160	HBM-T200
Travel
Work table travel(X/Y/Z)	mm	4000/1100	6000/1300	8000/1600	10000/2000
Distance from spindle surface to worktable	mm	0-1100	0-1300	0-1600	0-2000
Rail way	Two linear guide rail, one hardened rail
Work table
Table size	mm	4000×2000	6000×2000	8000×2000	10000×2000
The maximum load capacity of the workbench	T	30	50	70	100
Spindle
The spindle taper(model sleeve diameter)	mm	BT50	BT50	BT50	BT50
The spindle motor power	KW	22	26	26	30
Splindle speed	RPM	2000	2000	2000	2000
Accuracy
Position Precision	mm	0.01/1000	0.01/1000	0.01/1000	0.01/1000
Repeated position precision	mm	±0.01	±0.01	±0.01	±0.01
Size
Net weight	T	40	55	65	75

Product details

Casting

The base, worktable, column, sliding seat, and rotary worktable are all made of HT300 cast iron, high-quality resin sand
molding, high-strength and high-quality cast iron, and have a perfect heat treatment process to eliminate residual stress,
and arrange enough reinforcing rib plates to ensure the whole machine has sufficient strength, rigidity and high stabilit

Ram

The ram is made of high-strength and high-quality cast iron HT300, which has been heat-treated and surface-quenched.
At the same time, all surfaces of the ram are ground to ensure high rigidity and stability when the ram and the main
shaft are extended, and at the same time, it can be used for years without wear. The ram is located in the middle of the column, providing greater stability and rigidity than traditional off-hook rams

X AXIS

The X-axis adopts two heavy-duty 65 line rails, and the line rails adopt the Taiwan brand Hiwin

Y Axis

The Y-axis adopts four heavy-duty line rails, two line rails are located on the front face of the column, and the other
two line rails are located on the rear inner side of the column, so as to ensure that the ram can ensure sufficient rigidity
and stability when milling forward and moving left and right
The Y-axis of the T160 floor boring machine adopts a nitrogen balance cylinder and a pulley block for counterweight to
increase the Y-axis stroke. At the same time, it is ensured that the uppermost side of the Y-axis stroke end can also be
processed stably.