ritmo 75-250mm Automatic butt fusion welding machine CNC ASIA FA 250 CNC system

Add a review.

$29,710.85

10 in stock

  Ask a Question
SKU: 3256801923305659

Description

Butt fusion welding can be managed automatically by using the Delta Dragon CNC system; this would eliminate any
risk of error due to the operator. It is available in two versions: SA with manual extraction of heating plate, FA with
integrated mechanical extraction of heating plate.

The CNC system is available for two machines: Delta Dragon 250 and 315. The gearcase it is equipped with a compact

and innovative plastic casing, which can resist to the most extreme job site working conditions; particular attention

was paid to the connections as well, by applying military type plugs. An easy to use software and control panel allow to

view the most widely used welding standards (ISO, GIS, DVS and other). By selecting any one of the standard and pipe

diameter/SDR, all the welding parameters (pressure, time, temperature) would be automatically calculated according

to the standard itself. If the chosen welding cycle is not included in the standards listed above, it is possible to manually

input the welding parameters (diameter, SDR, type of material, welding time and pressure…) by simply entering the

“out of standard” mode. In both cases, the machine is able to automatically manage all the phases of the welding cycle,

including milling and heating control. At the end of the welding cycle, all data are stored in the in-built memory, up to 4000

records. Serial ports enable the operator to connect the gearcase to a portable serial printer (to obtain an immediate

report) or to a PC. The gearcase is equipped with GPS, USB port for welding report in PDF and to firmware upgrade.

The complete configuration includes:

– a linear transducer applied to the machine body

– a manually extractable heating element (SA) or an automatically extractable heating element (FA)

– hydraulic hoses with non-drip quick couplings for connecting the gearcase to the machine body

– a milling cutter

– a transducer cable for connecting the gearcase to the machine body

– a milling cutter/heating plate support

Features:
  1. Preloaded major welding standard (IS0 DVS, TSG, GIS WIS and others ),fully record the welding parameters.
2. Welding data can be printed and can be transform to thermal via wifi, realize real-time monitoring.
3. Traceability option: position , material ,date ,operator ,welding parameter and others
4. Stable quality, long working life , can reduce the loss caused by equipment failure
5. New touch screen , GPS location , Enter the operating system by swiping  card .
6. Heating plate pop-up automatically , no manual operation , reduce operation step , increase the level of automation .
Standard composition :
Machine body , milling cutter ,heating plate ,hydraulic control unit , support, tool bag, clamps 90、110、160、200、250mm
On request :
Clamps 75 / 125、140、180、225mm
Working range : 75-250mm
Rated voltage : 220VAC-50/60HZ
Rated power : 3950W
Memory record :  4000

Transportation:The specific freight method and freight can be negotiated.

Reviews

There are no reviews yet.

Be the first to review “ritmo 75-250mm Automatic butt fusion welding machine CNC ASIA FA 250 CNC system”
No more offers for this product!

General Inquiries

There are no inquiries yet.